PRODUCT DATA SHEET Model No. HX-1010
|
|
KEY FEATURES
- 10 tons (120,000 BTUH) of heat removal
- Water temperature to process adjustable from 65° to 75°F
- 10 GPM flow required to process at 250 PSI
- Compressed air purge circuit to be included
- Water components constructed of nonferrous materials
|
HX-1010
PlasmaGun®
WATER-TO-WATER
HEAT EXCHANGER
FOR THE 80 KW
PLASMAGUN SYSTEM
|
SPECIFICATIONS |
|
|
Model:
|
HX-1010
|
Max. Plant Water Temp.
|
50°F
|
|
Capacity:
|
10.0 tons
|
Max. Plant Water Flow:
|
30 GPM
|
|
To Process Temperature:
|
65°F
|
Min. Plant Water ΔP:
|
25 PSI
|
|
Process Pump:
|
7.5 HP
|
Max. Plant Water Pressure:
|
125 PSI
|
|
Flow:
|
10 GPM
|
Shipping Weight:
|
400 lbs.
|
|
Pressure:
|
250 PSI
|
Length:
|
38"
|
|
Process Connections:
|
¾" hose barb
|
Width:
|
24"
|
|
Plant Water Conn:
|
1½" FNPT
|
Height:
|
33"
|
|
Voltage:
|
440-480V/3/60
|
Full Load Amps
|
13 amps
|
|
|
|
|
FEATURES OF WATER CIRCUIT |
- All components in contact with process water are constructed of nonferrous materials
- Stainless steel brazed plate heat exchanger
- Modulating valve to provide temperature control
- Internal, insulated polyethylene reservoir with sight glass
- All-bronze regenerative turbine process pump
- Pressure regulating valve for process flow and pressure adjustment
- Process supply pressure switch
- Y-strainer on process supply and return lines
- Compressed air purge circuit
|
|
|
FEATURES OF CONTROL PANEL |
- NEMA-1 electrical enclosure with fused disconnect switch
- Dual LED digital displays of actual and set point temperatures
- PID microprocessor to control modulating valve
- Diagnostic lights (Pump On, High Water Temperature, No Flow, Low Reservoir Level)
- Remote communication contact closures (process flow switch made, process pressure switch made, return water temperature switch made, reservoir level switch made)
- On/Off and Air Purge
|
|
|
